home *** CD-ROM | disk | FTP | other *** search
- /*
- * crypto.h - public data structures and prototypes for the crypto library
- *
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is the Netscape security libraries.
- *
- * The Initial Developer of the Original Code is
- * Netscape Communications Corporation.
- * Portions created by the Initial Developer are Copyright (C) 1994-2000
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Dr Vipul Gupta <vipul.gupta@sun.com>, Sun Microsystems Laboratories
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
- /* $Id: cryptohi.h,v 1.9 2005/03/08 07:08:48 julien.pierre.bugs%sun.com Exp $ */
-
- #ifndef _CRYPTOHI_H_
- #define _CRYPTOHI_H_
-
- #include "blapit.h"
-
- #include "seccomon.h"
- #include "secoidt.h"
- #include "secdert.h"
- #include "cryptoht.h"
- #include "keyt.h"
- #include "certt.h"
-
-
- SEC_BEGIN_PROTOS
-
-
- /****************************************/
- /*
- ** DER encode/decode (EC)DSA signatures
- */
-
- /* ANSI X9.57 defines DSA signatures as DER encoded data. Our DSA code (and
- * most of the rest of the world) just generates 40 bytes of raw data. These
- * functions convert between formats.
- */
- extern SECStatus DSAU_EncodeDerSig(SECItem *dest, SECItem *src);
- extern SECItem *DSAU_DecodeDerSig(SECItem *item);
-
- /*
- * Unlike DSA, raw ECDSA signatures do not have a fixed length.
- * Rather they contain two integers r and s whose length depends
- * on the size of the EC key used for signing.
- *
- * We can reuse the DSAU_EncodeDerSig interface to DER encode
- * raw ECDSA signature keeping in mind that the length of r
- * is the same as that of s and exactly half of src->len.
- *
- * For decoding, we need to pass the length of the desired
- * raw signature (twice the key size) explicitly.
- */
- extern SECStatus DSAU_EncodeDerSigWithLen(SECItem *dest, SECItem *src,
- unsigned int len);
- extern SECItem *DSAU_DecodeDerSigToLen(SECItem *item, unsigned int len);
-
- /****************************************/
- /*
- ** Signature creation operations
- */
-
- /*
- ** Create a new signature context used for signing a data stream.
- ** "alg" the signature algorithm to use (e.g. SEC_OID_RSA_WITH_MD5)
- ** "privKey" the private key to use
- */
- extern SGNContext *SGN_NewContext(SECOidTag alg, SECKEYPrivateKey *privKey);
-
- /*
- ** Destroy a signature-context object
- ** "key" the object
- ** "freeit" if PR_TRUE then free the object as well as its sub-objects
- */
- extern void SGN_DestroyContext(SGNContext *cx, PRBool freeit);
-
- /*
- ** Reset the signing context "cx" to its initial state, preparing it for
- ** another stream of data.
- */
- extern SECStatus SGN_Begin(SGNContext *cx);
-
- /*
- ** Update the signing context with more data to sign.
- ** "cx" the context
- ** "input" the input data to sign
- ** "inputLen" the length of the input data
- */
- extern SECStatus SGN_Update(SGNContext *cx, unsigned char *input,
- unsigned int inputLen);
-
- /*
- ** Finish the signature process. Use either k0 or k1 to sign the data
- ** stream that was input using SGN_Update. The resulting signature is
- ** formatted using PKCS#1 and then encrypted using RSA private or public
- ** encryption.
- ** "cx" the context
- ** "result" the final signature data (memory is allocated)
- */
- extern SECStatus SGN_End(SGNContext *cx, SECItem *result);
-
- /*
- ** Sign a single block of data using private key encryption and given
- ** signature/hash algorithm.
- ** "result" the final signature data (memory is allocated)
- ** "buf" the input data to sign
- ** "len" the amount of data to sign
- ** "pk" the private key to encrypt with
- ** "algid" the signature/hash algorithm to sign with
- ** (must be compatible with the key type).
- */
- extern SECStatus SEC_SignData(SECItem *result, unsigned char *buf, int len,
- SECKEYPrivateKey *pk, SECOidTag algid);
-
- /*
- ** Sign a pre-digested block of data using private key encryption, encoding
- ** The given signature/hash algorithm.
- ** "result" the final signature data (memory is allocated)
- ** "digest" the digest to sign
- ** "pk" the private key to encrypt with
- ** "algtag" The algorithm tag to encode (need for RSA only)
- */
- extern SECStatus SGN_Digest(SECKEYPrivateKey *privKey,
- SECOidTag algtag, SECItem *result, SECItem *digest);
-
- /*
- ** DER sign a single block of data using private key encryption and the
- ** MD5 hashing algorithm. This routine first computes a digital signature
- ** using SEC_SignData, then wraps it with an CERTSignedData and then der
- ** encodes the result.
- ** "arena" is the memory arena to use to allocate data from
- ** "result" the final der encoded data (memory is allocated)
- ** "buf" the input data to sign
- ** "len" the amount of data to sign
- ** "pk" the private key to encrypt with
- */
- extern SECStatus SEC_DerSignData(PRArenaPool *arena, SECItem *result,
- unsigned char *buf, int len,
- SECKEYPrivateKey *pk, SECOidTag algid);
-
- /*
- ** Destroy a signed-data object.
- ** "sd" the object
- ** "freeit" if PR_TRUE then free the object as well as its sub-objects
- */
- extern void SEC_DestroySignedData(CERTSignedData *sd, PRBool freeit);
-
- /*
- ** Get the hash algorithm tag number for the given type of the key and
- ** algorithm tag. Returns SEC_OID_UNKNOWN if key and algorithm
- ** are not match.
- */
- extern SECOidTag SEC_GetSignatureAlgorithmOidTag(KeyType keyType,
- SECOidTag hashAlgTag);
-
- /****************************************/
- /*
- ** Signature verification operations
- */
-
- /*
- ** Create a signature verification context.
- ** "key" the public key to verify with
- ** "sig" the encrypted signature data if sig is NULL then
- ** VFY_EndWithSignature must be called with the correct signature at
- ** the end of the processing.
- ** "algid" specifies the signing algorithm to use. This must match
- ** the key type.
- ** "wincx" void pointer to the window context
- */
- extern VFYContext *VFY_CreateContext(SECKEYPublicKey *key, SECItem *sig,
- SECOidTag algid, void *wincx);
-
- /*
- ** Destroy a verification-context object.
- ** "cx" the context to destroy
- ** "freeit" if PR_TRUE then free the object as well as its sub-objects
- */
- extern void VFY_DestroyContext(VFYContext *cx, PRBool freeit);
-
- extern SECStatus VFY_Begin(VFYContext *cx);
-
- /*
- ** Update a verification context with more input data. The input data
- ** is fed to a secure hash function (depending on what was in the
- ** encrypted signature data).
- ** "cx" the context
- ** "input" the input data
- ** "inputLen" the amount of input data
- */
- extern SECStatus VFY_Update(VFYContext *cx, unsigned char *input,
- unsigned int inputLen);
-
- /*
- ** Finish the verification process. The return value is a status which
- ** indicates success or failure. On success, the SECSuccess value is
- ** returned. Otherwise, SECFailure is returned and the error code found
- ** using PORT_GetError() indicates what failure occurred.
- ** "cx" the context
- */
- extern SECStatus VFY_End(VFYContext *cx);
-
- /*
- ** Finish the verification process. The return value is a status which
- ** indicates success or failure. On success, the SECSuccess value is
- ** returned. Otherwise, SECFailure is returned and the error code found
- ** using PORT_GetError() indicates what failure occurred. If signature is
- ** supplied the verification uses this signature to verify, otherwise the
- ** signature passed in VFY_CreateContext() is used.
- ** VFY_EndWithSignature(cx,NULL); is identical to VFY_End(cx);.
- ** "cx" the context
- ** "sig" the encrypted signature data
- */
- extern SECStatus VFY_EndWithSignature(VFYContext *cx, SECItem *sig);
-
-
- /*
- ** Verify the signature on a block of data for which we already have
- ** the digest. The signature data is an RSA private key encrypted
- ** block of data formatted according to PKCS#1.
- ** "dig" the digest
- ** "key" the public key to check the signature with
- ** "sig" the encrypted signature data
- ** "algid" specifies the signing algorithm to use. This must match
- ** the key type.
- **/
- extern SECStatus VFY_VerifyDigest(SECItem *dig, SECKEYPublicKey *key,
- SECItem *sig, SECOidTag algid, void *wincx);
-
- /*
- ** Verify the signature on a block of data. The signature data is an RSA
- ** private key encrypted block of data formatted according to PKCS#1.
- ** "buf" the input data
- ** "len" the length of the input data
- ** "key" the public key to check the signature with
- ** "sig" the encrypted signature data
- ** "algid" specifies the signing algorithm to use. This must match
- ** the key type.
- */
- extern SECStatus VFY_VerifyData(unsigned char *buf, int len,
- SECKEYPublicKey *key, SECItem *sig,
- SECOidTag algid, void *wincx);
-
-
- SEC_END_PROTOS
-
- #endif /* _CRYPTOHI_H_ */
-